Ademco Vista 15 Support

What should I do if my Ademco Vista 15 system has a low battery?

THIS INFORMATION IS TAKEN DIRECTLY FROM THE MANUAL FOR THIS ALARM SYSTEM. TROUBLE CONDITIONS The display will indicate the status of the system, the messages below relate to power or battery trouble conditions. NO AC: AC power has been cut off. System is operating on backup battery power. BAT: There is a low-battery condition in […]

How to change or delete user codes for the Ademco Vista 15?

THIS INFORMATION IS TAKEN DIRECTLY FROM THE MANUAL FOR THIS ALARM SYSTEM. To Add a User or Change a User’s Code Important: Temporary users of the system (e.g., babysitter, cleaning staff) should not be shown how to use any system function they do not need to know, such as bypassing protection zones. You must make […]

How do I bypass zones on my Ademco Vista 15 system?

THIS INFORMATION IS TAKEN DIRECTLY FROM THE MANUAL FOR THIS ALARM SYSTEM. BYPASSING PROTECTION ZONES Using the [6] (Bypass) Key This key is used when you want to arm your system with one or more zones intentionally unprotected. Bypassed zones are unprotected and will not cause an alarm when violated while your system is armed. […]

How do I arm and disarm my Ademco Vista 15 system?

THIS INFORMATION IS TAKEN DIRECTLY FROM THE MANUAL FOR THIS ALARM SYSTEM. Arming Perimeter Only With Entry Delay On Using the [3] Key (STAY) to Arm Night-Stay Use this key when you are staying inside, but expect someone to use an entry/exit door later. When armed in STAY mode, the system will sound an alarm […]

Why is my Ademco Vista 15 system beeping?

THIS INFORMATION IS TAKEN DIRECTLY FROM THE MANUAL FOR THIS ALARM SYSTEM. TROUBLE CONDITIONS Typical Check Displays The word CHECK on the keypad’s display, accompanied by a rapid beeping at the keypad, indicates a trouble condition in the system. The displays in parentheses in the left column below may appear on non-alpha keypads when the […]