DSC Impassa Support

What should I do if my DSC Impassa system has a low battery?

THIS INFORMATION IS TAKEN DIRECTLY FROM THE MANUAL FOR THIS ALARM SYSTEM. Trouble Condition Indicator: Service Required (Press [1] for more information) Indicates Low Battery, System Trouble, System Tamper or RF Jam detected. Call your security provider for service. Trouble Condition Indicator: Module/Sensor Low Battery The system has detected a low battery condition with one […]

How do I add or change user codes for DSC Impassa system?

THIS INFORMATION IS TAKEN DIRECTLY FROM THE MANUAL FOR THIS ALARM SYSTEM. Access Code Programming In addition to the master code, you can program up to 16 additional user access codes. To program User Access Codes: 1. Disarm your system, if it is armed/set. 2. Press [*][5][Master Access Code (i.e., 4- or 6-digit code)]; the […]

How do I bypass zones on my DSC Impassa system?

THIS INFORMATION IS TAKEN DIRECTLY FROM THE MANUAL FOR THIS ALARM SYSTEM. Bypassing Zones Use the zone bypassing feature when you need access to a protected area while the system is armed/set, or when a zone is temporarily out of service but you need to arm/set the system. Bypassed zones will not be able to […]

How do I arm and disarm my DSC Impassa system?

THIS INFORMATION IS TAKEN DIRECTLY FROM THE MANUAL FOR THIS ALARM SYSTEM. Arming and Disarming (Setting/Unsetting) the System Stay Arming (Setting) Stay arming will bypass motion sensors and arm/set the perimeter of the system (i.e., doors and windows). Close all sensors (i.e., close doors). The Ready indicator will illuminate. Press and hold the Stay button […]

Why is my DSC Impassa system beeping?

THIS INFORMATION IS TAKEN DIRECTLY FROM THE MANUAL FOR THIS ALARM SYSTEM. Trouble Conditions When a trouble condition is detected, the Trouble indicator will turn on and the keypad will beep every 10 seconds. Press the [#] button to silence the beeps. Press [✱][2] to view the trouble condition. The Trouble indicator will flash. Use […]