DSC PC1616/PC1832/PC1864 Support

How do I bypass zones on my DSC PC1616/PC1832/PC1864 system?

THIS INFORMATION IS TAKEN DIRECTLY FROM THE MANUAL FOR THIS ALARM SYSTEM. Bypassing Zones Use the zone bypassing feature when you need access to a protected area while the system is armed, or when a zone is temporarily out of service, but you need to arm the system. Bypassed zones will not be able to […]

How do I add or change user codes for DSC PC1616/PC1832/PC1864 system?

THIS INFORMATION IS TAKEN DIRECTLY FROM THE MANUAL FOR THIS ALARM SYSTEM. Access Code Programming In addition to the Master Access Code, you can program up to 94 additional User Access codes (access codes 1-48 for PC1616, access codes 1-72 for PC1832 and access codes 1-95 for PC1864). Press (*) (5), plus your Master Access […]

What should I do if my DSC PC1616/PC1832/PC1864 system has a low battery?

THIS INFORMATION IS TAKEN DIRECTLY FROM THE MANUAL FOR THIS ALARM SYSTEM. Trouble Conditions When a trouble condition is detected, the Trouble or System indicator will turn on, and the keypad will beep every 10 seconds. Press the (#) key to silence the beeps. Press (*) (2) to view the trouble condition. The Trouble or […]

How do I arm and disarm my DSC PC1616/PC1832/PC1864 system?

THIS INFORMATION IS TAKEN DIRECTLY FROM THE MANUAL FOR THIS ALARM SYSTEM. Arming & Disarming the System Arming (Turning On/Setting) Close all sensors (i.e. stop motion and close doors). The Ready indicator should be on. To arm, press and hold the Away Key for 2 seconds and/or enter your Access Code, or press to Quick […]

Why is my DSC PC1616/PC1832/PC1864 system beeping?

THIS INFORMATION IS TAKEN DIRECTLY FROM THE MANUAL FOR THIS ALARM SYSTEM. Trouble Conditions When a trouble condition is detected, the Trouble or System indicator will turn on, and the keypad will beep every 10 seconds. Press the key to silence the beeps. Press to view the trouble condition. The Trouble or System indicator will […]