DSC PC2525 Support

What should I do if my DSC PC2525 system has a low battery?

THIS INFORMATION IS TAKEN DIRECTLY FROM THE MANUAL FOR THIS ALARM SYSTEM. Maintenance It is recommended that the back-up battery be replaced every three years. Contact your installing company for information on replacing the battery. To display the trouble conditions, enter [*] [2]. Trouble conditions are represented with the Zone Lights; if a Zone Light […]

How do I add or change user codes for DSC PC2525 system?

THIS INFORMATION IS TAKEN DIRECTLY FROM THE MANUAL FOR THIS ALARM SYSTEM. Changing Access Codes The PC2525 features 8 programmable Access Codes. The first code is the Master Code, and the remaining codes are normal Access Codes. Programming Access Codes: Enter [*][5][Master Code]; the “Program” light will FLASH. The Zone Lights will indicate which Access […]

How do I bypass zones on my DSC PC2525 system?

THIS INFORMATION IS TAKEN DIRECTLY FROM THE MANUAL FOR THIS ALARM SYSTEM. To Bypass Zones: Enter [*][1]; the “Bypass” light will FLASH. Enter the number of the zone to be bypassed; the corresponding Zone Light will come ON to indicate that the zone is bypassed. To remove a bypass, enter the zone number to shut […]

How do I arm and disarm my DSC PC2525 system?

THIS INFORMATION IS TAKEN DIRECTLY FROM THE MANUAL FOR THIS ALARM SYSTEM. Arming Your System Before arming the system, close all protected doors and windows, and stop movement in areas protected by motion detectors. When all zones are closed, all of the Zone Lights on the keypad will be OFF, and the “Ready” light will […]

Why is my DSC PC2525 system beeping?

THIS INFORMATION IS TAKEN DIRECTLY FROM THE MANUAL FOR THIS ALARM SYSTEM. Display Trouble Conditions The PC2525 constantly monitors itself to ensure proper operation. When a condition occurs that could affect operation, the “Trouble” light will come ON and the keypad sounder will beep every 10 seconds to indicate that there is a trouble condition […]