DSC PC4020 Support

How do I add or change user codes for DSC PC4020 system?

THIS INFORMATION IS TAKEN DIRECTLY FROM THE MANUAL FOR THIS ALARM SYSTEM. Programming A New Access Code To select a new access code for programming, perform the following steps: 1. Enter [✱][5] followed by a Master Code. 2. The display will read: “Select (0) < > User No. Search” Press [0] or [✱]. 3. The […]

What should I do if my DSC PC4020 system has a low battery?

THIS INFORMATION IS TAKEN DIRECTLY FROM THE MANUAL FOR THIS ALARM SYSTEM. To display the trouble conditions, enter [*] [2]. Failure of Replaceable Batteries This system’s wireless transmitters have been designed to provide several years of battery life under normal conditions. The expected battery life is a function of the device environment, usage and type. […]

How do I bypass zones on my DSC PC4020 system?

THIS INFORMATION IS TAKEN DIRECTLY FROM THE MANUAL FOR THIS ALARM SYSTEM. NOTE: For security reasons, your System Administrator may program the system to prevent you from bypassing certain zones. Bypassing zones reduces your security protection. If you are bypassing a zone due to damaged wiring or contacts, please notify your system administrator or call […]

How do I arm and disarm my DSC PC4020 system?

THIS INFORMATION IS TAKEN DIRECTLY FROM THE MANUAL FOR THIS ALARM SYSTEM. Arming Your System 1. Prepare the partition to be armed by closing all protected doors and windows. Also, stop any movement in areas covered by motion detectors. 2. If the time and date appears on the LCD keypad display, press the [#] key. […]

Why is my DSC PC4020 system beeping?

THIS INFORMATION IS TAKEN DIRECTLY FROM THE MANUAL FOR THIS ALARM SYSTEM. Viewing Trouble Conditions The alarm control panel continuously monitors a number of possible trouble conditions. If one of these conditions occurs, the keypad Trouble light will turn on and a beeping sound will be heard every 10 seconds. Press the [#] key to […]