DSC PC5020 Support

How do I add or change user codes for DSC PC5020 system?

THIS INFORMATION IS TAKEN DIRECTLY FROM THE MANUAL FOR THIS ALARM SYSTEM. Programming Access Codes LCD5500Z Keypads 1. Press to enter the function list. 2. Use the (< >) keys to scroll to “Press (*) for <> Access Codes”. 3. Press (*). The keypad will display “(*) to Edit User Code 01P”. 4. Scroll to […]

How do I bypass zones on my DSC PC5020 system?

THIS INFORMATION IS TAKEN DIRECTLY FROM THE MANUAL FOR THIS ALARM SYSTEM. Bypassing Zones with an LCD5500Z keypad Start with the system disarmed. 1. Press [*] to enter the function menu. The keypad will display “Press [*] for < > Zone Bypass”. 2. Press [*] OR [1] , then your [access code] (if required). The […]

How do I arm and disarm my DSC PC5020 system?

THIS INFORMATION IS TAKEN DIRECTLY FROM THE MANUAL FOR THIS ALARM SYSTEM. Arming Away Arming When you arm your system using the Away arming method, both interior zones (e.g., motion detectors) and border zones (e.g., door and window contacts) will be active and will cause an alarm to sound when opened. 1. Check that your […]

What should I do if my DSC PC5020 system has a low battery?

THIS INFORMATION IS TAKEN DIRECTLY FROM THE MANUAL FOR THIS ALARM SYSTEM. It is recommended that the back-up battery be replaced every three years. Contact your installing company for information on replacing the battery. Viewing Troubles: To display the trouble conditions, enter [*] [2]. Trouble conditions are represented with the Zone Lights; if a Zone […]

Why is my DSC PC5020 system beeping?

THIS INFORMATION IS TAKEN DIRECTLY FROM THE MANUAL FOR THIS ALARM SYSTEM. Identifying Trouble Conditions Your system continuously checks for a number of possible trouble conditions. If one of these trouble conditions occurs: • the Trouble indicator will be ON until the trouble is fixed; • the keypad will beep twice every 10 seconds until […]