DSC PC9047 Support

What should I do if my DSC PC9047 system has a low battery?

THIS INFORMATION IS TAKEN DIRECTLY FROM THE MANUAL FOR THIS ALARM SYSTEM View Trouble Conditions It is recommended that the back-up battery be replaced every three years. Contact your installing company for information on replacing the battery. When a trouble condition is detected, the Trouble indicator will turn on, and the keypad will beep every […]

How do I add or change user codes for DSC PC9047 system?

THIS INFORMATION IS TAKEN DIRECTLY FROM THE MANUAL FOR THIS ALARM SYSTEM Access Code Programming In addition to the Master Access Code, you can program up to 16 additional User Access codes. Press [*] [5], plus your Master Access Code, the Armed indicator will turn on. Enter the 2-digit number to be programmed (i.e. 06 […]

How do I bypass zones on my DSC PC9047 system?

THIS INFORMATION IS TAKEN DIRECTLY FROM THE MANUAL FOR THIS ALARM SYSTEM Bypassing Zones Use the zone bypassing feature when you need access to a protected area while the system is armed, or when a zone is temporarily out of service, but you need to arm the system. Bypassed zones will not be able to […]

How do I arm and disarm my DSC PC9047 system?

THIS INFORMATION IS TAKEN DIRECTLY FROM THE MANUAL FOR THIS ALARM SYSTEM Arming & Disarming the System Stay Arming Stay arming will bypass the interior protection (i.e. motion sensors) and arm the perimeter of the system (i.e. doors and windows). Close all sensors (i.e. stop motion and close doors). The Ready indicator should be on. […]

Why is my DSC PC 9047 system beeping?

THIS INFORMATION IS TAKEN DIRECTLY FROM THE MANUAL FOR THIS ALARM SYSTEM. Trouble Conditions When a trouble condition is detected, the Trouble indicator will turn on, and the keypad will beep every 10 seconds. Press the key to silence the beeps. Press to view the trouble condition. The Trouble indicator will flash. Use the keys […]