THIS INFORMATION IS TAKEN DIRECTLY FROM THE MANUAL FOR THIS ALARM SYSTEM Access Code Programming In addition to the master code, you can program up to 16 additional user access codes. If wireless keys have been programmed then wireless key #1 will log as User Access Code #1 (if that access code has been programmed). […]

THIS INFORMATION IS TAKEN DIRECTLY FROM THE MANUAL FOR THIS ALARM SYSTEM Bypassing Zones Use the zone bypassing feature when you need access to a protected area while the system is armed, or when a zone is temporarily out of service but you need to arm the system. Bypassed zones will not be able to […]

THIS INFORMATION IS TAKEN DIRECTLY FROM THE MANUAL FOR THIS ALARM SYSTEM Arming and Disarming the System Stay Arming Stay arming will bypass the interior protection (i.e., motion sensors) and arm the perimeter of the system (i.e , doors and windows) Close all sensors (i.e., stop motion and close doors). The Ready indicator will illuminate. […]

THIS INFORMATION IS TAKEN DIRECTLY FROM THE MANUAL FOR THIS ALARM SYSTEM View Trouble Conditions It is recommended that the back-up battery be replaced every three years. Contact your installing company for information on replacing the battery. When a trouble condition is detected, the Trouble indicator will turn on, and the keypad will beep every […]

Trouble Conditions When a trouble condition is detected, the Trouble Indicator will turn on and the keypad will beep every 10 seconds. Press the [#] button to silence the beeps. Press the [*][2] to view the trouble condition. The Trouble Indicator will flash. Use the scroll [] keys to view troubles. Alternate Communicator Trouble Indicates […]