GE Allegro Support

What should I do if my GE Allegro system has a low battery?

THIS INFORMATION IS TAKEN DIRECTLY FROM THE MANUAL FOR THIS ALARM SYSTEM Panel Power Panel display indicates System Low Battery. Note: If AC power was out for a long period of time, the battery may not be fully charged. The power in the emergency backup battery is low and must be recharged or replaced. If […]

How do I add or change user codes for GE Allegro system?

THIS INFORMATION IS TAKEN DIRECTLY FROM THE MANUAL FOR THIS ALARM SYSTEM Primary User Code Note: The primary user code can not be deleted. There is one Primary User code which allows you to perform all system operations and user programming. Only the primary user code can program, change, or delete a regular user code […]

How do I bypass zones on my GE Allegro system?

THIS INFORMATION IS TAKEN DIRECTLY FROM THE MANUAL FOR THIS ALARM SYSTEM Bypassing Note: Direct bypassing of sensors can only be done at the panel. Only the primary access code can be used to bypass/unbypass sensors directly. Only sensors that are active in the current arming level can be bypassed. Attempting to bypass a sensor […]

How do I arm and disarm my GE Allegro system?

THIS INFORMATION IS TAKEN DIRECTLY FROM THE MANUAL FOR THIS ALARM SYSTEM Arming Options Quick Arm The Quick Arm option lets you arm your system without using an access code. You will still need to enter an access code to disarm the system. The dealer/installer can turn this feature on or off for you. See […]

Why is my GE Allegro system beeping?

Trouble Beeps and Trouble Messages When your system detects a problem, it lets you know by sounding trouble beeps from panel, and by displaying status messages on the panel display (see Appendix B). Silencing Trouble Beeps To silence trouble beeps: Perform a system status check by pressing ? on a touchpad. If possible, correct the […]