GE Simon III Support

How do I add or change user codes for GE Simmon III system?

THIS INFORMATION IS TAKEN DIRECTLY FROM THE MANUAL FOR THIS ALARM SYSTEM System Battery Failure This condition occurs if the emergency backup battery has failed. Status beeps will start and the SYSTEM STATUS button will light. Press the SYSTEM STATUS button to hear the trouble message. If your AC power is not working, your security […]

How do I add or change user codes for GE Simmon III system?

THIS INFORMATION IS TAKEN DIRECTLY FROM THE MANUAL FOR THIS ALARM SYSTEM Access Codes Your security system has a master access code and access codes 1-5 used for arming and disarming the panel. The master code is used for disarming and programming your system. Access codes 1-5 are generally used for children or as temporary […]

How do I bypass zones on my GE Simmon III system?

THIS INFORMATION IS TAKEN DIRECTLY FROM THE MANUAL FOR THIS ALARM SYSTEM Direct Bypassing Direct Bypassing refers to turning off (bypassing) certain sensors while the system is armed. Note: You can only use this feature if there is a Bypass button on your panel and there are no Special Motion Chime sensors in your system. […]

How do I arm and disarm my GE Simmon III system?

THIS INFORMATION IS TAKEN DIRECTLY FROM THE MANUAL FOR THIS ALARM SYSTEM –Arming Your System with Doors & Windows Closed 1. Close all doors and windows. 2. Press Arm Doors & Windows button. 3. Enter Access Code (if needed). –Arming Your System with Doors or Windows Open (Indirect Bypassing) 1. Close all doors and windows […]

Why is my GE Simon III system beeping?

THIS INFORMATION IS TAKEN DIRECTLY FROM THE MANUAL FOR THIS ALARM SYSTEM. Trouble Beeps Your security system is able to automatically test itself for: • Power failures • Low batteries • Non-working sensors • Communication troubles with the Central Monitoring Station When your security system detects one of the problems above, six rapid beeps sound […]