Honeywell Ademco Lynx 5210 Support

Honeywell Ademco Lynx 5210 is showing a Trouble or Supervisory signal

If your system is displaying a Trouble condition or a Supervisory signal, the following information may help:  When the message “Not Ready To Arm – System Trouble” is displayed in a yellow status bar along the top of the screen, you can view the Trouble condition by pressing the ‘SECURITY’ icon, then pressing the ‘SYSTEM’ […]

Honeywell Ademco Lynx 5210 system shows a low battery

Display and Indicators When you go to arm the message “Not Ready To Arm – System Trouble” is displayed in a yellow status bar along the top of the screen. A low battery icon along with “Low Battery” is displayed when the system’s backup battery power is low. Low Battery Conditions in Wireless Sensors Each […]

How to change user codes for Honeywell Ademco Lynx 5210 system

Adding a User With the system in the disarmed state, select the “Tools” icon from the second page of the Security Screen. The system displays the Keypad screen. Enter your 4-digit Master User Code. The system displays the Master User programming screen. Select the “Users” icon. The system displays the Master User screen. Select the […]

How to bypass zones on Honeywell Ademco Lynx 5210 system

Bypassing Individual Zones –With the system in the disarmed state, select “Zones” icon. The system displays the Zones/Bypass Screen. –Select the zone(s) that you wish to bypass and then select “Bypass” OR if the “Force Bypass” feature has been programmed by your Installer, selecting the “Bypass All Faulted” button allows you to bypass all faulted […]

How to arm and disarm Honeywell Ademco Lynx 5210 system?

Arming in Stay Mode –Select the Arm Stay icon, the system beeps once and displays a keypad. –Enter a valid User Code. OR If Quick Arm has been enabled, select the “Quick Arm” icon. Note: If a valid user code is not entered or the Confirm icon has  not been selected within 10 seconds, the […]

Why is Ademco Lynx 5210 system beeping?

THIS INFORMATION IS TAKEN DIRECTLY FROM THE MANUAL FOR THIS ALARM SYSTEM. If you would like to read and search the pdf version of this manual, you can link to that here. Once there, type “Ctrl F” to pull up a search box and search for your issue. **IMPORTANT** If the LYNX Touch is beeping […]