Honeywell Lynx Plus Support

How do I add or change user codes for Honeywell Lynx Plus system?

THIS INFORMATION IS TAKEN DIRECTLY FROM THE MANUAL FOR THIS ALARM SYSTEM. To Add/Delete a User or Change a User’s Code Changing the Master User Code: Follow the procedure for changing a user’s code, but enter User No. 02 and enter the new code twice. Add a user code: Enter Master code + [CODE] Key […]

How do I bypass zones on my Honeywell Lynx Plus system?

THIS INFORMATION IS TAKEN DIRECTLY FROM THE MANUAL FOR THIS ALARM SYSTEM. Bypassing To bypass a zone(s): Enter user code + BYPASS + 2-digit zone number(s) for zone(s) to be bypassed (e.g., 01, 02, 03, etc.). Important! All single-digit numbers must be preceded by a zero (for example, enter 01 for zone 1). The keypad […]

How do I arm and disarm my Honeywell Lynx Plus system?

THIS INFORMATION IS TAKEN DIRECTLY FROM THE MANUAL FOR THIS ALARM SYSTEM. Arming in Stay Mode To arm in STAY mode: Enter user code + [STAY] or press and hold [STAY] to quick arm. Arming In Away Mode To arm in AWAY mode: Enter user code + [AWAY] or press and hold [AWAY] to quick […]

What should I do if my Honeywell Lynx Plus system has a low battery?

THIS INFORMATION IS TAKEN DIRECTLY FROM THE MANUAL FOR THIS ALARM SYSTEM. Trouble Messages Typical Trouble Condition Displays To silence the beeping sound for fault conditions, press any key. Lowbat (no zone no.) – Accompanied by a once-per 45 seconds beeping at the keypad, indicates a low system battery condition exists. Refer to the Changing […]

Why is my Honeywell Lynx Plus system beeping?

THIS INFORMATION IS TAKEN DIRECTLY FROM THE MANUAL FOR THIS ALARM SYSTEM. Trouble Messages Typical Trouble Condition Displays To silence the beeping sound for fault conditions, press any key. Fault – Indicates that a problem exists with the zone(s) displayed, accompanied by rapid beeping. First, determine if the zone(s) displayed are intact and make them […]