THIS INFORMATION IS TAKEN DIRECTLY FROM THE MANUAL FOR THIS ALARM SYSTEM. To Change System Master code System master code + [8] + 02 + new Master code + new code again To Add a User IMPORTANT: Temporary users should not be shown how to use any system function they do not need to know […]

THIS INFORMATION IS TAKEN DIRECTLY FROM THE MANUAL FOR THIS ALARM SYSTEM. To bypass zones, the system must be disarmed first. BYPASS Enter your security code and press [6] (BYPASS). Enter zone number(s) for the zones to be bypassed (e.g., 01, 02, 03, etc.). Important! All single-digit numbers must be preceded by “00 ” (for […]

THIS INFORMATION IS TAKEN DIRECTLY FROM THE MANUAL FOR THIS ALARM SYSTEM. Arming the System Stay Mode: Arms Perimeter Only, Entry Delay On • Used when you want to arm the system with persons staying inside (or if you have pets that are moving throughout the premises). • The perimeter sensors are armed, but interior […]

THIS INFORMATION IS TAKEN DIRECTLY FROM THE MANUAL FOR THIS ALARM SYSTEM. Trouble Conditions “Check” and “Battery” Displays The word CHECK on the keypad’s display, accompanied by a “beeping” at the keypad, indicates a trouble condition in the system. To silence the beeping for these conditions, press any key. A display of “CHECK” and one […]

THIS INFORMATION IS TAKEN DIRECTLY FROM THE MANUAL FOR THIS ALARM SYSTEM. Trouble Conditions “Check” and “Battery” Displays The word CHECK on the keypad’s display, accompanied by a “beeping” at the keypad, indicates a trouble condition in the system. To silence the beeping for these conditions, press any key. 1. A display of “CHECK” and […]