THIS INFORMATION IS TAKEN DIRECTLY FROM THE MANUAL FOR THIS ALARM SYSTEM
The Quick Arm option lets you arm your system without using an access code. You will still need to enter an access code to disarm the system. The dealer/installer can turn this feature on or off for you. See Table B4: System Options, on page 19, to see if this feature is available to you.
–To arm to Level 2 with Quick Arm enabled: Press LOCK button once.
–To arm to Level 3 with Quick Arm enabled: Press LOCK button twice.
Auto STAY Arm
The Auto STAY Arming feature helps cut down on false alarms in the event that you arm the system to Level 3, but fail to leave during the Exit Delay time. Here’s how it works-
If you arm the system to Level 3, and do not leave the premises within the Exit Delay time:
If feature turned on– The system can tell that no one opened and closed a delay door within the delay time. It assumes that someone is still inside and the panel will arm to Level 2 to avoid a false alarm. Your movement inside the premises will not cause an alarm.
If feature turned off– The system arms to Level 3 regardless of whether or not a delay door has been opened and closed. Your movement inside the premises could activate a motion detector, causing an alarm.
To disarm to Level 1 using a wireless touchpad:
1. Press the DISARM button.
2. Enter your access code.